RIGOL DP832 DC power supply, 3 outputs, 30V/3A || 30V/3A, 5V/3A, 195W, Low ripple and noise: <350uVrms / 2mVpp, Display resolution: 10mV/10mA,3 years warranty

Product Information

The DP832A is a Triple Output 30V/3A & 30V/3A & 5V/3A Bench Linear DC Power Supply. Each model in the Rigol DP800 series of high-performance programmable linear DC power supplies is user-friendly, affordable and possesses multiple protection features. Like all Rigol devices, the Rigol DP832 features a very well constructed and easy to use interface, which also offers comprehensive ease-of-use functions, such as programmable voltage curves. The menu has an intuitive structure. USB – Standard, RS232, LAN & Digital I/O – Standard on DP8xxA, optional on DP8xx, USB-GPIB – Optional on all models Wenn Sie am Gerät einen Defekt vermuten, sorgen Sie dafür, bevor Sie das Gerät wieder betreiben, dass eine Untersuchung durch RIGOL autorisiertem Personal durchgeführt wird. Jedwede Wartung, Einstellarbeiten oder Austausch von Teilen am Gerät, sowie am Zubehör dürfen nur von RIGOL autorisiertem Personal durchgeführt werden. DP832 Calibration Script (Python): bson has ported the DP832 calibration script of LaurentR (mentioned above) to Python. This is great for those who don't have MATLAB.

The DP832 is a Triple Output 30V/3A & 30V/3A & 5V/3A Bench Linear DC Power Supply. Each model in the Rigol DP800 series of high-performance programmable linear DC power supplies is user-friendly, affordable and possesses multiple protection features. Please review the following safety precautions carefully before putting the instrument into operation so as to avoid any personal injury or damage to the instrument and any product connected to it. To prevent potential hazards, please use the instrument only specified by this manual.Provide Sense function to automatically compensate for the voltage drop caused by the load lead in high current output. Provide waveform display function to provide real-time and dynamic display of the output voltage/current waveform, clearly showing the output state and tendency of the instrument in together with the digital display of the voltage, current and power values Provide dedicated preset key to perform one-key reset and one-key recall of the commonly used output voltage and current configurations Voltage and Current can be (re)calibrated if necessary. See attached PDF file "DP800 Calibration Guide.pdf". However, there have been reports of calibration failing, possibly because of difficulty with SCPI commands (at least in 01.08); refer to issue 2 of "Known Firmware Bugs". Furthermore, firmware 01.11 introduced a bug in calibration as described here and subsequent posts.

Zur Vermeidung von Kurzschluß im Geräteinneren und Stromschlag betreiben Sie das Gerät bitte niemals in feuchter Umgebung.

Each model has a 3.5″ TFT display, multi-colour on ‘DP8xxA’ models and selectable single colour on ‘DP8xx’ models. Series and Parallel connections: Rigol outline correct connections between terminals for series (higher voltage) or parallel (higher current) operation. See attached PDF "DP800 Outputs in Series and Parallel.pdf". If a probe is used, do not connect the ground lead to high voltage since it has isobaric electric potential as the ground. Die Erdungsklemmen der Sonden sindauf dem gleichen Spannungspegel des Instruments geerdet. SchließenSie die Erdungsklemmen an keine hohe Spannung an. For the multi-channel model, the function of this part is channel selection and output switch. For the single-channel model, the function of this part is range selection and output switch.